Description

SONAX UltimateCut

Highly effective abrasive polishing paste for high processing speeds, containing pure, ultra-hard aluminium oxide. Dėl “low dust” technologijos praktiškai nepalieka ant paviršiaus jokių polirolio
residues. Works well with wool pads – Flexipads ProWool cor with a hard sponge pad –Sonax hard polishing pad

Application:

1. Sand the surface with an abrasive of 1000 grit or finer
   paper and wipe clean. Remember that when sanding with paper,
   the paper must always be damp.
2. Apply a small amount of paste to the polished
   surface or on a polishing pad, polish, for about 10 seconds in small
   revolutions by pressing harder and tilting the polisher slightly.
3. Then polish for 20 seconds by pressing firmly
   the full surface of the polishing disc.
4. Remove any residual polish.
5. After this paste, use SONAX Perfect Finish -polish
   for the finish (gloss) code:

ATTENTION:

1. Do not allow the polished surface to overheat.
2. Clean the polishing discs regularly.
3. Never use the same polishing disc with different polishes.
4. Keep out the cold.