FX Protect G-Finity™ Graphene Coating grafeno danga

a protective nano-ceramic coating for the car body, with graphene, the strongest, most flexible and thinnest material. The addition of graphene compared to conventional ceramic coatings allows for incredible water repellency categorised as Super-Hydrophobic and a significant increase in surface slipperiness and colour tone. G-Finity™ Graphene Coating creates a thick elastomeric protective layer that allows minor maintenance scratches to heal spontaneously when the surface is heated naturally or heated artificially. The protective coating is designed to achieve all the benefits in 1 coat.

Characteristics:

1. Super-hydrophobic properties
2. Coating with graphene additive
3. Has self-healing properties
4. Lasts up to 4 years.
5. Forms a thick protective layer of up to 2 microns
6. Provides protection against UV radiation, dirt and harmful weather conditions
7. Highlights the shade
8. Masks minor maintenance scratches
9. Increases surface slipperiness

Set includes: coating volume of your choice, applicator block, 3 pcs. 10x10cm applicators, instructions.

Technical features:

Hardness: 10H
Water drop contact angle: up to 160°
Endurance: up to 4 years or ~50000 km
Coating thickness: up to 2 μm
Self-healing: yes
Yield: 15ml – 20ml for 1 coat, possible layering with 4h interval
Curing time: Initial 12h, Full 7 days
Chemical resistance: 2-12 ph
Coating instructions:

1. Surfaces must be clean, dry and free of body dirt.
2. Polishing before application is recommended for best surface preparation.
3. Degrease with FX Protect Surface Agent or other preparatory cleaner
4. Prepare an applicator and two microfibre cloths for cleaning and polishing the excess coating.
5. Shake the coating container
6. Put a few drops on the applicator
7. Apply the coating in 50x50cm areas using crosswise “#” movements
8. Allow the chemical reaction to proceed for up to 30sec. according to room conditions.
9. Wipe off excess coating with the first low-fibre microfibre cloth
10. Wipe the area with a second microfibre cloth until you can no longer see any residue or bright spots.
11. Repeat the process on all parts.
12. 8-10 hours after the last coat is applied, we recommend applying FX Protect Relo-G™ Graphene Booster, which will protect the coating from water and plaque until the coating reaches full resistance.