SONAX CUTMAX PROFILINE polishing paste

16.0050.00

Description

Sonax CutMax polishing paste

has extremely strong abrasive properties, giving the treated surface an incredibly high gloss. This polyol leaves only minimal polishing marks and, thanks to its “low dust” technology, leaves virtually no polyol residue on the surfacekučių. Ideal for use with Sonax hard sponge “Sonax Hard Polishing Pad”, Flexipads ProWool or Meguiar’s Microfibre Pad

Application:

1. If necessary, sand the surface with 1000 grit or finer sandpaper and wipe clean. Remember that when sanding with paper, the paper must always be damp.
2. Apply a small amount of paste to the polishing pad, polish for about 10 seconds at low speed, applying more pressure and tilting the polisher slightly.
3. Then polish with the full surface of the buffing disc for 20 seconds with light pressure.
4. Remove any leftover polish.
5. After this paste, use SONAX Perfect Finish to finish polishing (shine)

Warning:

  1. Do not allow the polished surface to overheat.
  2. Clean the polishing discs regularly.
  3. Never use the same polishing disc with different polishes.
  4. Keep out the cold.

Additional information

Vol.

250ml, 1000ml