Description

FX Protect G-Finity™ CNT Graphene Coating graphene coating

a technologically advanced and unique protective nano-ceramic coating for car bodywork, complemented by the strongest, most flexible and thinnest material – graphene, and an additive with extremely high tensile and mechanical strength – carbon nanotubes. The addition of graphene compared to conventional ceramic coatings results in incredible water repellency categorised as Super-hydrophobia and significantly increase surface slipperiness and colour tone, while carbon nanotubes give the coating flexibility and adhesion to the lacquer layer under different temperature changes – expansion in summer and contraction in winter. The carbon nanotubes also create outstanding optical properties and the coating’s ability to absorb UV radiation.

Characteristics:

1. Super-hydrophobic properties
2. Coating with graphene additive and carbon nanotubes.
3. Applying 2 coats allows self-healing.
4. Lasts up to 5 years.
5. Forms a thick protective layer of up to 1.25 microns
6. Provides protection against UV radiation, dirt and harmful weather conditions
7. Highlights the shade
8. Masks minor maintenance scratches
9. Increases surface slipperiness

Set includes: coating volume of your choice, applicator block, 3 pcs. 10x10cm applicators, instructions.

Technical features

Hardness: 10H
Water drop contact angle: up to 165°
Endurance: up to 5 years or ~60,000 km
Coating thickness: up to 1,25 μm
Self-healing: yes, with 2 layers
Yield: 15ml – 20ml for 1 coat, Layering up to 2 coats with 4h interval possible
Curing time: Initial 12h, Full 7 days
Chemical resistance: 2-12 ph
Coating instructions:

1. Surfaces must be clean, dry and free of body dirt.
2. Polishing before application is recommended for best surface preparation.
3. Degrease with FX Protect Surface Agent or other preparatory cleaner
4. Prepare an applicator and two microfibre cloths for cleaning and polishing the excess coating.
5. Shake the coating container
6. Put a few drops on the applicator
7. Apply the coating in 50x50cm areas using crosswise “#” movements
8. Allow the chemical reaction to proceed for up to 1-3min. according to room conditions.
9. Wipe off excess coating with the first low-fibre microfibre cloth
10. Wipe the area with a second microfibre cloth until you can no longer see any residue or bright spots.
11. Repeat the process on all parts.
12. 8-10 hours after the last coat is applied, we recommend applying FX Protect Relo-G™ Graphene Booster, which will protect the coating from water and plaque until the coating reaches full resistance.